TELONE II Soil Fumigant

TELONE II Soil Fumigant controls or suppresses the following pests when applied at labeled rates:

• Bacterial Canker
• Bindweed, Field/European
• Centipede
• Cricket, Mole
• Morningglory, Perennial
• Nematode
• Nematode, Columbian Root-knot
• Nematode, Cyst
• Nematode, Northern Root-knot
• Nematode, Potato Cyst
• Nematode, Root-knot
• Nematode, Stubby-root
• Quackgrass
• Soil Borne Diseases
• Symphylan
• Thistle, Canada
• Verticillium Dahliae
• Wilt, Fusarium
• Wilt, Verticillium
• Wireworm

• Beet, Sugar
• Blackberry (All Types)
• Caneberry
• Carrot
• Corn (All Types)
• Cotton
• Cropland
• Crops, Unspecified
• Field Crops
• Fruit, Citrus
• Fruit, Stone
• Fruit, Tree
• Lawns /Turf
• Loganberry
• Mint
• Nurseries
• Nursery Crops
• Nursery Stock
• Nuts (All Types)
• Onion
• Peach
• Peanut
• Pineapple
• Potatoes
• Raspberry, Black
• Raspberry, Red
• Strawberry
• Vegetables

Personal Protection

Tasks with liquid contact potential are tasks performed outdoors or in a well-ventilated area. They include: Equipment calibration or adjustment Equipment clean-up and repair Product sampling Any activity less than 6 feet from an unshielded pressurized hose containing this product Rinsate disposal Fumigant transfer Clean-up of small spills Preparing containers for aeration Any other task not otherwise listed in (2), (3), or (4) below Handlers performing tasks with liquid contact potential must wear at minimum: Coveralls over short-sleeved shirt and short pants Chemical-resistant gloves, such as barrier laminate (EVAL) or viton Chemical-resistant footwear plus socks Chemical-resistant headgear for overhead exposure Chemical-resistant apron A face shield or safety glasses with brow and temple shields (do not wear chemical goggles) A half-face respirator with either an organic-vapor-removing cartridge with a prefilter approved for pesticides (MSHA/NIOSH approval number prefix TC-23C) or canister approved for pesticides (MSHA/NIOSH approval number prefix TC-14G). See further respirator requirements in the User Safety Requirements section on this label. Handlers Performing Tasks with No Liquid Contact Potential – Broadcast, In-Bed Applications, or Applications at the Time of Bedding Except as in 2b. Tasks with no liquid contact potential are tasks performed outdoors or in a well-ventilated area. These tasks include: Tractor driving Soil sealing Field activities on the day of application that do not disrupt the soil at the depth of liquid injection Handlers performing tasks with no liquid contact potential must wear at minimum: Loose fitting or well ventilated long-sleeved shirt and long pants Shoes and socks A face shield or safety glasses with brow and temple shields (do not wear chemical goggles) A half-face respirator with either an organic-vapor-removing cartridge with a prefilter approved for pesticides (MSHA/NIOSH approval number prefix TC-23C) or canister approved for pesticides (MSHA/NIOSH approval number prefix TC-14G). A respirator is not required (not applicable in California) if the occupants are within an enclosed cab that is in conformance with one of the following: 1) ANSI/ASAE S525-1.1 MAY98 sections 7.1.5, 7.1.7, 7.2.3, and 9, or 2) the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides -- 40 CFR 170.240(d)(5). The cab must be equipped with a vapor-adsorptive filter containing a minimum of 1000 grams activated charcoal. The filter must be changed after no more than 50 hours of application time. See further respirator requirements in the User Safety Requirements section on this label. In addition, the PPE specified in (1) for activities with direct liquid contact potential must be immediately available and must be worn if the handler is to perform any direct-contact activity with a potential for liquid contact 2b. Handlers Performing Tasks with No Liquid Contact Potential - Pre-Bed, Row Product Applications (e.g., Yetter Rig) (Not Applicable in California) Tasks with no liquid contact potential are tasks performed outdoors or in a well-ventilated area. These tasks include: Tractor driving Soil sealing Field activities on the day of application that do not disrupt the soil at the depth of liquid injection Handlers performing tasks with no liquid contact potential must wear at minimum: Loose fitting or well ventilated long-sleeved shirt and long pants Shoes and socks A face shield or safety glasses with brow and temple shields (do not wear chemical goggles) In addition, the PPE specified in (1) for activities with direct liquid contact potential must be immediately available and must be worn if the handler is to perform any direct-contact activity with a potential for liquid contact Handlers in Treated Area 1 to 5 Days After Application Only the following handler tasks may be performed in the treated area within 5 days after the application is complete: Assessing/adjusting the soil seal Assessing pest control, application technique, or application efficacy Sampling air or soil for this product Removing tarp or plastic film All other tasks are prohibited until the 5-day period has expired. Handlers in treated area 1 to 5 days after application must wear at minimum: Loose fitting or well ventilated long-sleeved shirt and long pants Shoes and socks A face shield or safety glasses with brow and temple shields (do not wear chemical goggles) A half-face respirator with either an organic-vapor-removing cartridge with a prefilter approved for pesticides (MSHA/NIOSH approval number prefix TC-23C) or canister approved for pesticides (MSHA/NIOSH approval number prefix TC-14G). A respirator is not required if the occupants are within an enclosed cab (not applicable in California) that is in conformance with one of the following: 1) ANSI/ASAE S525-1.1 MAY98 sections 7.1.5, 7.1.7, 7.2.3, and 9, or 2) the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides -- 40 CFR 170.240(d)(5). The cab must be equipped with a vapor-adsorptive filter containing a minimum of 1000 grams activated charcoal. The filter must be changed after no more than 50 hours of application time. See further respirator requirements in the User Safety Requirements section on this label. In addition, the PPE specified in (1) for activities with direct liquid contact potential must be immediately available and must be worn if the handler is to perform any direct-contact activity with a potential for liquid contact Handlers Exposed to High Concentrations Handlers exposed to high airborne concentrations of this product, such as cleanup following large spills and exposure to this product in poorly ventilated areas, must wear at minimum: Chemical-resistant suit Chemical-resistant gloves, such as barrier laminate (EVAL) or viton Chemical -resistant footwear plus socks Chemical-resistant headgear Supplied-air respirator with MSHA/NIOSH approval number prefix TC-19C or self-contained breathing apparatus (SCBA) with MSHA/NIOSH approval number prefix TC-13F. See further respirator requirements in the User Safety Requirements section on this label.

• Keep out of direct sunlight
• Is not vulnerable to flame or sparks
• May be stored in a damp place
• May be stored in a warm place
• May be frozen