AIR OR GROUND
DIRECTIONS FOR USE
BRANDT MAGNIFY is a water conditioning agent / surfactant
formulated with ammonium salts, non-ionic surfactants and
anti-foaming agents. BRANDT MAGNIFY enhances the biological
activity and leaf-surface penetration of herbicides, defoliants
and desiccants whose labels specify the addition of ammonium
sulfate/ nitrate and/or surfactants. These may include glyphosatecontaining
products, paraquat-containing products, sulfonyl
urea herbicides, and others. BRANDT MAGNIFY may be used on
agricultural, aquatic, forestry, turf and ornamental, industrial, and
Read and follow the precautions, restrictions and recommendations
on the labels of pesticides used with BRANDT MAGNIFY. Use
according to the most restrictive label directions for each product
in any tank mix.
COMPATIBILITY: BRANDT MAGNIFY is compatible with most
pesticides. However, if the desired combination has not been
previously used, a compatibility test is recommended.
MIXING: Shake well before using. Fill spray tank 1/2 full of water
and begin agitation. Add the recommended amount of MAGNIFY.
Add products as directed by label or in the following sequence
and continue filling tank: (1) Dry flowables or water dispersing
granules, (2) Wettable powders, (3) Flowables, (4) Solutions, (5)
Emulsifiable concentrates. Continue agitation until spray solution
is completely mixed. Continuous agitation of finished spray
is recommended. If spray solution has been allowed to stand,
thoroughly agitate and remix before application.
RECOMMENDATIONS: Specific use rates will vary with conditions
of application such as water hardness, application method,
equipment, spray droplet size, condition of foliage, etc. Also,
higher rates than those below may be used if recommended by
pesticide labeling. Follow pesticide label directions. However, do
not add this product at a rate which exceeds 5% of the finished
spray volume. One gallon of BRANDT MAGNIFY contains 2 lbs. of
Air or Ground Application: Use 1-4 quarts per 100 gallons of
finished spray solution. For improved efficacy, use at least 1 pint
per acre when finished spray volume is less than 20 gallons per
acre. For backpack or hand held sprayers, use 1/3 to 1 1/4 fl.oz.
per gallon of finished spray solution.
AIR or GROUND: Use 1-4 quarts per 100 gallons of finished spray solution. For improved efficacy, use at least 1 pint per acre when finished spray volume is less than 20 gallons per acre.