GRASSES GROWN FOR SEED OR SOD PRODUCTION (ESTABLISHED GRASSES) - SUSCEPTIBLE BROADLEAF WEEDS
This product is formulated as an emulsifiable concentrate of octanoic acid and heptanoic acid esters of bromoxynil containing the equivalent of 2.5 pounds of bromoxynil per gallon and 2.5 pounds per gallon of isooctyl ester of MCPA.
This product is a selective postemergence herbicide for control of important broadleaf weeds infesting wheat, barley, oats, rye, flax, and grass grown for sod. optimum weed control is obtained when this product is applied to actively growing weed seedlings. This product is primarily a contact herbicide, therefore thorough coverage of the weed seedlings is essential for optimum control.
This product has little residual activity. Therefore subsequent flushes of weeds will not be controlled by the initial treatment. generally crops that form a good canopy will help shade subsequent weed flushes.
Occasional transitory leaf burn may occur. The temporary leaf burn is similar to that seen with liquid fertilizer. because the activity of this product is mainly contact, recovery of the crop is generally rapid with no lasting effect. Frequency and amount of leaf burn may be greater when crops are stressed by abrasive winds, cool to cold evening temperatures or mechanical injury, such as that caused by hail, sleet or insect feeding. To reduce the potential for temporary leaf burn, applications should be made to dry foliage in the listed spray volumes per acre when weather conditions are not extreme.
AERIAL APPLICATION: Aerial application is prohibited within 300 feet of residential areas (e.g., homes, schools, playgrounds, shopping areas, hospitals, etc.)
Do not apply with backpack or hand-held application equipment.
Apply to non-residential turf only. Do not apply to residential, playground, or schoolyard turf.
This product can be applied to registered use areas by ground, aerial and sprinkler irrigation equipment.
Select a spray volume and delivery system that will ensure thorough and uniform spray coverage. For optimum spray distribution and thorough coverage use of flat fan nozzles spaced no more than 20 inches on the boom with a spray pressure of 40 to 50 psi. nozzle types, nozzle spacings and lower spray pressures that product coarse spray droplets may not provide adequate coverage of the weeds to ensure optimum control. Raindrop nozzles and flood nozzles are not recommended as weed control with this product may be reduced. A spray volume of 10 to 20 gallons per acre (gPA) is required for optimum spray coverage. A maximum ground speed of 10 mph is suggested. ground applications made when dry, dusty field conditions exist may provide reduced weed control in wheel track areas. Applications using less than 10 gallons per acre may result in reduced weed control.
When weed infestations are heavy, use of higher spray volumes will be helpful in obtaining uniform weed coverage. If you are unsure of the infestation level or size of crop, consult your local agronomist or extension service.
Do not apply when winds are gusty or when other conditions favor poor spray coverage and/or off target spray movement.
Use orifice discs, cores and nozzle types and arrangements that will provide for optimum spray distribution and maximum coverage. A minimum spray volume of 5 gPA and a maximum pressure of 40 psi. A minimum spray volume of 3 gallons per acre may be used if crop canopy and weed density allow adequate spray coverage. Aerial applications using less than 5 gallons of spray volume per acre may result in reduced weed control.
Do not apply during inversion conditions, when winds are gusty or when other conditions favor poor spray coverage and/or off target spray movement. Off target spray movement can be minimized by increasing the spray volume per acre and not applying when winds exceed 10 mph.
The REI for harvesting sod farm turf is 12 days. The REI for other turf activities is 24 hours.
GRASSES GROWN FOR SEED OR SOD PRODUCTION
Seedling and Established Grasses
Apply to established and newly seeded grasses grown for sod production before the boot stage. Apply through automated sprinkler irrigation systems with mechanical transfer loading system only. See MIXING, LOADING AND HANDLING INSTRUCTIONS section for complete details.
Optimal control will be attained when weeds are treated in the seedling stage (less than 4-leaf stage, 2 inches in height or 1 inch in diameter).
Chemigation only: Use 1-3/5 pints / acre
Weeds germinating after spraying will not be controlled.
RESTRICTIONS AND PRECAUTIONS: Grasses grown for sod production
- Do not allow livestock to graze in treated areas or feed treated grasses to livestock.
- Do not apply this product to grasses grown for seed or sod production with backpack or hand-held application equipment.
- Do not apply more than 1.6 pints of this product per acre in a single growing season.
- Do not plant rotational crops within 30 days following this product’s application.
- Do not apply more than 1.5 lbs ai per acre per year of MCPA.
- Do not apply more than 2 applications per year with a minimum retreatment interval of 21 days.