General Information


Before using this product, read all the following instructions carefully. Shake all containers before use. Open packages only when ready to use. Prepare only as much of this material as can be used that same day. Any opened but unused material must be discarded at the end of each day. Do not apply individual components of VAULT LVL Inoculation System to the seed separately. VAULT LVL Inoculation System components must be mixed together as indicated in the following instructions prior to application to the seed. Use with an EPA-approved dye or colorant that imparts an unnatural color to the seed.

Combine the complete contents of the 260 fl. oz. bladder of Inoculant plus the 40 fl. oz. bottle of Conditioner plus the 13.6 fl. oz bottle of Integral in a clean mixing container. Mix together thoroughly. Continuous agitation is recommended throughout the mixing and application process. This mixture will treat 10,000 lbs. of soybean seed when applied according to label directions.

The VAULT LVL Inoculation System may be applied either by itself or with a compatible seed treatment.


Some seed treatments may be harmful to the Vault LVL Inoculation System. Contact your dealer or check our web site at for current details. Please observe planting window recommendations for optimal responses.

Limitations, Restrictions, and Exceptions

If applied without a seed treatment, thoroughly mix 186 fl. oz. of cool, clean non-chlorinated water with the Vault LVL Inoculation System and apply the resulting mixture at the rate of 5.0 fl. oz. per 100 lbs. of seed. While the material may be applied without the additional water, rhizobia survival will be enhanced when total volume of liquid applied to the seed is at least 5.0 fl. oz. per 100 lbs. of seed.