General Information


Rely 200 Herbicide is a nonselective herbicide for application as a foliar spray for the control of a broad spectrum of emerged annual and perennial grass and broadleaf weeds. Rely 200 Herbicide will also control certain woody species. Plants that have not yet emerged at the time of application will not be controlled. THOROUGH SPRAY COVERAGE IS IMPORTANT. Visual effects and control from an application of Rely 200 Herbicide occur within 2 to 4 days after application under good growing conditions.

Avoid all contact with foliage or green tissue of desirable vegetation. Do not spray during windy conditions. This product may injure or kill growing plants that receive spray drift or if they receive applications of a spray mixture containing Rely 200 Herbicide by error or accident. If desirable vegetation is contacted, rinse the sprayed portion with water immediately to reduce potential injury.

Rely 200 Herbicide works best when weeds are actively growing. Warm temperatures, high humidity, and bright sunlight improve the performance of Rely 200 Herbicide. Weed control may be reduced when applications are made to weeds under stress due to drought or cool temperatures. Weeds under stress or in dense populations will require application at the highest specified label use rate. Stressed conditions also include prior treatments of other contact or systemic herbicides. Do not retreat these weeds with Rely 200 Herbicide until sufficient new or regrowth has occurred. Refer to the How to Apply section of the label.

Apply Rely 200 Herbicide as a directed spray to control undesirable vegetation in apple orchards, grape vineyards, and in tree nut groves for tree nuts listed below. When applied as recommended in the label, Rely 200 Herbicide controls annual and perennial weeds. Refer to the How to Apply section of the labeling for recommended rates and a list of weeds controlled. Apply as a broadcast, banded, or spot treatment application depending on the situation. Avoid direct spray or drift to desirable vegetation. Regrowth may occur due to the weed stage of growth at application, low use rate, or environmental conditions. Repeat applications of Rely 200 Herbicide may be necessary to control plants generating from underground parts or seed.

In the State of New York Only: Not For Use In Nassau and Suffolk Counties.

Limitations, Restrictions, and Exceptions


When applied as recommended, LIBERTY HERBICIDE controls undesirable plant vegetation in non-crop areas around farmstead building foundations, shelter belts, along fences, and general nonselective farmstead weed control.


Rely 200 Herbicide is a foliar-active material with little or no perceptive soil-residual activity. Best results are obtained when applications are made to actively growing weeds. Rely 200 Herbicide is rainfast for most weeds within 4 hours after application.

Rainfall, overhead irrigation, or flood irrigation within 4 hours may necessitate retreatment.

Repeat applications of Rely 200 Herbicide or tank mixes of Rely 200 Herbicide with appropriate residual herbicides will be needed to control weeds emerging from underground parts or seeds.

When using Rely 200 Herbicide in a weed control program with other herbicides, follow the precautions and “Directions For Use” for those herbicides.


Apply Rely 200 Herbicide by ground equipment only. Do not apply Rely 200 Herbicide aerially to Tree and Vine Crops. Do not apply this product through any type of irrigation system. Good spray coverage of target weeds is necessary for optimum control.

Broadcast Application

Use the recommended rate of Rely 200 Herbicide as shown in the following sections. Rely 200 Herbicide should be applied in a minimum of 15 gallons of water per acre. Under dense weed canopies, 20 to 40 gallons of water per acre should be used so that thorough spray coverage will be obtained. Select a spray pressure which will achieve a droplet size of about 300 microns. Properly calibrate your spraying equipment to assure applications at the correct rates and volumes.

Banded Application

Banded applications may be used using the formula shown on the label to calculate the amount of herbicide needed for orchard or vineyard strip sprays.

For best results with ground broadcast or banded application equipment, use flat fan nozzles. Check for even distribution of spray droplets. Do not apply when weather conditions favor drift, such as when winds are gusty. Applications under conditions which cause drift of this product will result in damage to any vegetation contacted.

Spot or Directed-Spray Application

For spot or spray application, use Rely 200 Herbicide at 2.4 fluid ounces of product per gallon of water. Spray undesirable vegetation

foliage on a spray-to-wet basis prior to runoff. Ensure uniform and complete coverage. Use a coarse spray. Do not spray during windy

conditions. Thoroughly clean the sprayer following use.

DO NOT make spot spray applications to apple suckers, as tree injury may occur.


1. DO NOT apply more than 345 fluid ounces of this product per acre to any site in any calendar year.

2. DO NOT graze, harvest, and/or feed treated orchard cover crops to livestock.

3. DO NOT apply this product through any type of irrigation system.

4. DO NOT apply this product aerially to tree and vine crops.

5. DO NOT apply this product within 14 days of nut, apple, or grape harvest.

6. Compatibility of Rely 200 Herbicide and clay-based, dry-flowable herbicides should be determined before tank mixing.



- Redstem Filaree: Use for control of redstem filaree not permitted in California unless otherwise directed by supplemental labeling.

Restricted Entry Interval

12 hours