VEGETABLE CROPS - SWEET CORN - FALL ARMYWORM - FOLIAR APPLICATIONS
Unless specified otherwise in the crop-specific recommended application section, BAYTHROID XL may be applied by the following methods:
Foliar Spray Application
Foliar applications may be made using properly calibrated ground sprayers, fixed- or rotary-winged aircraft or through properly designed, sprinkler-type, chemigation equipment (See Chemigation Application directions in the label). Thorough and uniform coverage of plants, with direct contact of the spray mixture to the target pests, is required for satisfactory control.
Avoid application procedures where thorough coverage of plant is not possible. Applications made with less than thorough coverage may result in slower activity and/or less overall control from a single application than an application made with higher gallonages. Refer to Spray Drift Reduction Management section in the label for application guidelines on minimizing drift from all application methods.
Ground applications should be made in a minimum of 10 gallons/A unless specified otherwise in crop-specific recommended application section.
Aerial applications should be made in a minimum of 2 gallons/A unless specified otherwise in crop-specific recommended application section, however 5 gallons/A are recommended. See crop specific gallonage requirements. Aerial applications made to dense canopies may not provide sufficient coverage of lower leaves or interior plant portions to provide pest control. Higher labeled rates of BAYTHROID XL may be necessary for aerial applications.
For all crops, apply specific dosage of BAYTHROID XL at early threshold for target pest, as population begins to develop. Degree of control or suppression of additional labeled pests will be determined, in part by the stage of pest development at application and infestation level of those pests.
Application timing should be based on careful scouting and local economic thresholds. BAYTHROID XL may be applied before, during, or after planting. Use the higher rates for moderate to heavy insect pressure. Lower rates are generally adequate for low to moderate insect pressure but require careful scouting and may require more frequent application.
BAYTHROID XL is an Emulsifiable Concentrate formulation and is active by contact and ingestion. Thorough coverage is necessary for optimum performance.
Notes and Restrictions
Pre-Harvest Interval (PHI): 0 day.
Maximum BAYTHROID XL allowed per 2 day interval: 2.8 fluid ounces/A (0.022 lb AI/Acre).
Maximum BAYTHROID XL allowed per crop season: 28.0 fluid ounces/A (0.22 lb AI/Acre).
Minimum ULV application volume (once refined cotton seed/vegetable oil): 1.0 qt/A – aerial application.