RESIDENTIAL AND INDUSTRIALIZED PESTS

Limitations, Restrictions, and Exceptions

RESIDUAL PEST CONTROL : Homes, laboratories; NON-FOOD/NON-FEED AREAS–Restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation–Aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage–Commercial, industrial, apartment, office and storage buildings.

CRACK AND CREVICE APPLICATION: Cockroaches, Spiders, Crickets, Silverfish, Firebrats–Use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

FOOD HANDLING ESTABLISHMENTS: Places other than private residences in which food is held, processed, prepared or served.

Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS: Sowbugs, Pillbugs, Millipedes, and Centipedes–Apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below.

ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects–Locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

OUTDOORS: For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies, and Wasps–Apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

Timings