SUNFLOWERS (CONFECTIONARY AND OIL) - AT PLANTING
Soil Application Precautions
For standard planters and applications systems, do not start insecticide application until planter enters the soil, and stop insecticide application before pulling planter out of the soil. If contaminated seed is exposed to the surface cover completely with soil.
For standard planters equipped with in-furrow systems having automatic shut-off systems (e.g., Custom Delivery Systems (CDS), Custom Injection Systems (CIS)) be sure shut-off devices are maintained and operating properly.
DO NOT FLUSH, DRAIN OR PUMP TANK, LINES OR RINSATE ON NON-CROPLAND SURFACES. Dispose of residual spray mixture left in tank, line(s) and/or rinsate from first flushing of tank and line(s) by application to cropland as directed on the label.
Pints of Furadan 4F Per Acre (Do not cut or graze within)
0.5 pint/acre (7days)
1 pint/acre (14days)
2 pints/acre (28days)
SUNFLOWERS (CONFECTIONARY AND OIL)
- Use 2.5 fluid ounces of Furadan 4F per 1000 linear feet of row (1.4 quarts per acre with 30 inch row spacing). Apply directly into the seed furrow. Furadan 4F may be mixed with water or liquid fertilizer. When Furadan 4F is used with liquid fertilizers, premix one part of Furadan 4F with two parts of water. Check physical compatibility before mixing large quantities. Add this premix to the tank of fertilizer along with the rinsings from the premixing container. Maintain agitation in the tank after mixing and during application. Do not mix until ready to use. Observe all precautions listed in the Soil Application Precautions Section.