GOLF, SOD AND INSTITUTIONAL TURF SITES - PINK AND GRAY SNOW MOLD
GENERAL USE: In order to assure maximum crop tolerance and disease control, follow recommendations on the label and all the precautions and limitations of the package label.
GENERAL PRECAUTIONS AND RESTRICTIONS:
Use of this product at residential sites is prohibited.
Except for use on golf courses, if applying this product adjacent to a water body such as a lake, reservoir, river, permanent stream, marsh or natural pond, estuary, or commercial fish pond, there must be at least a 25-foot vegetative buffer strip between the water body and the point of application.
For golf courses only, do not apply to turf cut higher than 1\" on golf holes where water bodies are present.
Do not apply this product when the wind direction is toward aquatic areas.
DIRECTIONS THROUGH SPRINKLER IRRIGATION SYSTEMS
Do not use through sprinkler irrigation systems in California.
Apply this product only through sprinkler irrigation systems including center pivot. Do not apply this product through any other type of irrigation system.
NOTE: When treatment with 26/36 Fungicide has been completed, further field irrigation over the treated area should be avoided for 24 to 48 hours to prevent washing the chemical off the crop.
GENERAL PRECAUTIONS FOR APPLICATIONS THROUGH SPRINKLER IRRIGATION SYSTEMS
Maintain continuous agitation in mix tank during mixing and application to assure a uniform suspension.
Greater accuracy in calibration and distribution will be achieved by injecting a larger volume of a more dilute solution per unit time. The system must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately located on the irrigation pipeline to prevent water source contamination from backflow. The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid back toward the injection pump. The pesticide injection pipeline must also contain a functional, normally closed solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shutdown. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops. The irrigation line or water pump must include a functional pressure switch, which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump,such as a positive displacement injection pump (e.g.,diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock.
Do not apply when wind speed favors drift, when system connection or fittings leak, when nozzles do not provide uniform distribution or when lines containing the product must be dismantled and drained.
Crop injury, lack of effectiveness, or illegal pesticide residues in the crop may result from nonuniform distribution of treated water.
Allow sufficient time for pesticide to be flushed through all lines and all nozzles before turning off irrigation water. A person knowledgeable of the chemigation system and responsible for its operation must shut the system down and make necessary adjustments should the need arise.
Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system unless the label-prescribed safety devices for public water supplies are in place.
GOLF, SOD AND INSTITUTIONAL TURF SITES
26/36 Fungicide is a foliar applied fungicide recommended for turfgrass disease control on golf courses, sod farms, and institutional areas where fine turf is grown. It provides effective broad spectrum disease management when used in conjunction with good turf management practices, alone or tank mixed with other compatible fungicides.
One application before permanent snow cover if possible, another application during a mid-winter thaw.