COTTON - Bollworm, caterpillars, armyworms, leaf perforators, & stink bugs

General Information

Add the concentrate to the spray tank while filling with water, and mix thoroughly either by means of a tank agitator or pump by-pass. For best results, thoroughly cover all surfaces to be treated with spray. Rates of application given below should not be exceeded. Never apply later than indicated to assure residue levels at harvest are below tolerance established by the Environmental Protection Agency.

Consult the State Agricultural Extension Service or Experiment Station for specific recommendations regarding application, dosage and timing of spray. For application by ground equipment, add the desired amount of concentrate to sufficient water to apply at least 3 gallons of water per acre. For application by aircraft, add the amount of concentrate desired per acre to 1 to 3 gallons of water consistent with crop growth and good coverage.

Limitations, Restrictions, and Exceptions

COTTON - Bollworm, caterpillars, armyworms, leaf perforators, & stink bugs

Do not use undiluted form.

Do not apply this product through any type of irrigation system.

Applications should be made at 4 to 5 day intervals until control is obtained.

Note: In Texas cotton only, may be applied ultra-low volume (ULV) diluted in 1 quart of refined vegetable oil (such as cottonseed). Apply aerially with aircraft outfitted with a delivery system designed to apply droplets with a VMD of 120 to 220 microns. When using conventional hydraulic nozzle systems, the nozzles should be oriented 90 degrees to the laminar airflow. Swath width should not exceed wing span plus 10%.

Pre-Harvest Interval

7 days

Restricted Entry Interval

4 days