Tri-Con 80-20

SnapshotID: 53335

Active ingredients

ChloropicrinMethyl Bromide

Classification

WSSA mode of action

Miscellaneous nonspecific (multi-site) inhibitors

Product safety

Protections

Personal Protection

When performing tasks with NO potential for contact with liquid fumigant, all handlers (including applicators) must: Wear long-sleeved shirt, long pants, shoes and socks. Not wear jewelry, goggles, tight clothing, chemical-resistant gloves, rubber protective clothing, or rubber boots when handling. Methyl bromide can be trapped inside clothing and cause skin injury. Handlers with no potential for contact with liquid fumigant (e.g. shovelers) may wear cotton, leather, or other porous, non-chemical-resistant gloves. If such gloves are exposed to liquid fumigant, they must immediately be removed and discarded. When performing tasks with potential for contact with liquid fumigant, all handlers (including applicators) must wear: Long-sleeved shirt and long pants, Chemical-resistant gloves, Chemical-resistant apron, Protective eyewear (Do NOT wear goggles), and Chemical-resistant footwear with socks. In addition, when an air-purifying respirator is required under th label’s Directions for Use, Protection for Handlers, Respiratory Protection and Stop Work Triggers section, handlers (including applicators) must wear: A NIOSH-certified full-facepiece air-purifying respirator with cartridges certified by the manufacturer for protection from exposure to methyl bromide at concentrations up to 5 ppm (e.g., a 3M air-purifying respirator equipped with 3M Model 60928 Organic Vapor/Acid Gas/P100 cartridges).

Restricted Entry Interval

 5 days (120 hours) after the application is complete for untarped applications, or  5 days (120 hours) after the application is complete if tarps are not perforated and removed for at least 14 days after the application is complete, or  48 hours after tarp perforation is complete if tarps will be perforated within 14 days after the application is complete and will not be removed for at least 14 days after the application is complete, or  tarp removal is completed if tarps are both perforated and removed less than 14 days after application is complete.