PESTS ON OUTSIDE SURFACES OF BUILDINGS (0.50% DILUTION)

Limitations, Restrictions, and Exceptions

OUTDOOR PEST CONTROL:

For contact and residual spray, refer in the label for the mixing procedure with water.

For heavy infestations, use the 0.50% dilution. For lighter infestations and for maintenance purposes, use the 0.25% dilution. One gallon of finished spray is sufficient to treat 1580 linear feet with a 6 inch spray band.

PESTS ON OUTSIDE SURFACES OF BUILDINGS (0.50% DILUTION)

Use this product to control ants, clover mites, earwigs, millipedes and Sowbugs (Pillbugs) on the outside surfaces of buildings. To help prevent infestation of buildings, treat the building foundation to a height of 2 to 3 feet where pests are and may find entrance. Also, as a residual spray to outside surfaces of buildings, including porches, screens, window frames, eaves, patios, garages, refuse dumps, and other areas where these pests congregate or have been seen. Repeat treatment as needed to maintain effectiveness.

Method
Timings