WARM SEASON GRASS (NEW SEEDING, PLUGGING, OR SPRIGGING)
BOV-A-MURA is made by a process which converts dairy manure to a soluble, consistent, and easy-to-use spray formulation. Manure from dairy farms is filtered, blended and stabilized into a uniform solution. BOV-A-MURA is then treated to make it acceptable for use on fine turfgrasses.
BOV-A-MURA has been used on the finest championship golf courses, race tracks, football fields, soccer fields, grass tennis courts and other fine turf areas in the United States and Europe for many years. Professional turf managers have found that BOV-A-MURA filled a need in their turf care programs. BOV-A-MURA enhances good turf and soil management programs and is intended to supplement a complete fertilizer program based on soil test recommendations.
No fertilizer is 100% available and no plant is 100% efficient in taking up applied nutrients from the soil. BOV-A-MURA helps overcome this soil immobilization by stimulating the microorganisms in the soil. The nitrogen and decomposable organic matter in BOV-A-MURA furnishes needed energy for these soil microbes. A few of the many benefits of this product are:
- Promotes deep-root development and density
- Speeds up “knitting-down” of new sod
- Supports the development of soil microorganisms
- Can be applied with most pesticides
DIRECTIONS FOR USE
Spray tank should be cleaned. Add water to tank first. A line strainer (usually 50 mesh) is recommended. Use nozzle strainers (50-100 mesh) to maintain flow rate. Refer to nozzle catalog for appropriate strainer. Dilution rate is not critical; however, add one gallon BOV-A-MURA to at least six gallons of water.
BOV-A-MURA can be tank mixed with most pesticides. Always jar test a small batch before mixing different products in the same tank mix. In hot weather spray in the late afternoon. For cleanup, rinse with clean water.
DO NOT APPLY NEAR WATER, STORM DRAINS, OR DRAINAGE DITCHES.
DO NOT APPLY IF HEAVY RAIN IS EXPECTED. APPLY THIS PRODUCT ONLY TO YOUR LAWN/GARDEN.
WARM SEASON GRASS
New Seeding, Plugging, or Sprigging: Apply 5 gallons of BOV-A-MURA per acre 10 to 14 days after seeding. Or, apply 1 pint of product per 1,000 sq. ft. at 10-14 days after seeding.
FOR FLORIDA: We recommend that you follow the Golf Course BMP’s at: http://www.dep.state.fl.us/water/nonpoint/docs/nonpoint/glfbmp07.pdf