BLUEBERRY

General Information

DIRECTIONS FOR DILUTION

DILUTE APPLICATION: Ground Application: Apply specified rate in 20 to 60 gallons of water per acre. Orchard Application: Apply specified rate in 100 to 800 gallons of water per acre.

CONCENTRATE APPLICATION: Ground Application: Apply specified rate in not less than 5 gallons of water per acre. Orchard Application: Apply specified rate in 20 to 100 gallons of water per acre. Special concentrate equipment is necessary for these uses.

AIR APPLICATION: Apply specified rate in 5 to 20 gallons of water per acre. Orchard rates should not be applied in less than 10 gallons of water per acre.

APPLICATIONS

Do not use this product for any uses other than those specified on the label. When using in the greenhouse or stored grain facilities as recommended on the label, use only with adequate ventilation. After application, ventilate thoroughly before occupying enclosed spaces. All rates are for a dilute spray. All rates are per acre.

Refer to the label for tank mix information.

Limitations, Restrictions, and Exceptions

BLUEBERRY

Use higher rate when foliage is heavy or infestation is severe. Apply when pests first appear. Apply the following specified rates in sufficient water to thoroughly cover 1 acre. By ground, apply using a minimum of 10.0 gallons of water per acre and by air apply using a minimum of 2.0 gallons of water per acre (standard is 100 gallons of water for thorough coverage sprays). Do not apply orchard rates in less than 10.0 gallons of water per acre.

Do not apply within 1 day of harvest.

Pre-Harvest Interval

1 days

Restricted Entry Interval

12 hours

Timings