APPLICATION IN A SLURRY OR IN A TANK MIX WITH A CHEMICAL SEED TREATMENT

General Information

INSTRUCTIONS FOR USE:

Before using this product, read all the following instructions carefully. Shake all containers before use. Open packages only when ready to use. Prepare only as much of this material as can be used that same day. Any opened but unused material must be discarded at the end of each day. Do not apply individual components of VAULT LVL Inoculation System to the seed separately. VAULT LVL Inoculation System components must be mixed together as indicated in the following instructions prior to application to the seed. Use with an EPA-approved dye or colorant that imparts an unnatural color to the seed.

Combine the complete contents of the 260 fl. oz. bladder of Inoculant plus the 40 fl. oz. bottle of Conditioner plus the 13.6 fl. oz bottle of Integral in a clean mixing container. Mix together thoroughly. Continuous agitation is recommended throughout the mixing and application process. This mixture will treat 10,000 lbs. of soybean seed when applied according to label directions.

The VAULT LVL Inoculation System may be applied either by itself or with a compatible seed treatment.

SEED TREATMENT COMPATIBILITY

Some seed treatments may be harmful to the Vault LVL Inoculation System. Contact your dealer or check our web site at www.beckerunderwood.com for current details. Please observe planting window recommendations for optimal responses.

Limitations, Restrictions, and Exceptions

If applied in a slurry or in a tank mix with a chemical seed treatment no additional dilution with water is necessary as long as the total volume is at least 5.0 fl. oz per 100 lbs. of seed. Add the VAULT LVL Inoculation System mixture to an amount of seed treatment appropriate to treat 10,000 lbs. of soybean seed. Mix thoroughly and apply the total volume to the seed. Always read and follow the use instructions on the seed treatment label.

If applied in a wet sequential application with a chemical seed treatment no additional dilution with water is necessary as long as total volume of liquid is at least 5.0 fl. oz. per 100 lbs. of seed.

Keep treated seed as cool as possible (34-68° F / 1-20° C). Plant all treated seed as soon as possible, and within a maximum of 30 days following inoculation without a chemical seed treatment. When this material is applied with a chemical seed treatment, a shorter planting window may be recommended (see below).

Timings