COTTON - ARMYWORMS FALL, ETC.

General Information

GENERAL INSTRUCTIONS

Use low rate under light-to-moderate infestation. Higher rates should be used under heavy insect pressure. The rate of application is variable according to insect pressure, timing of spray and field scouting.

Preventive Use

For cutworm, armyworm, or stalk borer control, Respect insecticide may be applied before, during, or after planting. For soil-incorporated applications, use higher rates for improved control. DO NOT exceed maximum allowable rate.

Refer to the label for tank mix information.

Limitations, Restrictions, and Exceptions

COTTON

Method of Application

Respect may be applied in water or refined vegetable oil. When water is used, apply a minimum of one gallon of finished spray per acre by air or five gallons of finished spray with ground equipment. When applying in water by air, one quart of emulsified oil may be substituted for one quart of water in the finished spray. When using oil, use a minimum of one quart per acre in the finished spray.

Control of lepidopteran eggs may be achieved with proper timing of applications.

For boll weevil control, apply Respect at a 3- to 4-day interval until pest numbers are reduced to acceptable levels.

DO NOT exceed maximum allowable rate.

DO NOT graze or feed cotton for forage.

Tobacco Budworm: See the resistance statement under the Directions For Use section.

Pre-Harvest Interval

14 days

Restricted Entry Interval

12 hours

Timings