COTTON - PREEMERGENCE OR PREPLANT UP TO 14 DAYS PRIOR TO PLANTING
This product is a selective preemergent herbicide for use in cotton to control pigweed (e.g. Palmer amaranth). This product is also active on a range of annual grass and small seeded broadleaf weeds. This product may be applied as preplant or preemergent surface application in coarse, medium or fine textured soils. Herbicidal symptoms of this product appear as white (chlorotic) or pink growing points in susceptible plant species. Cotton is tolerant to applications of this product when applied according to the label. Some crinkling or spotting on cotton foliage or stunting may occur, especially if heavy rainfall occurs during or soon after cotton emergence, but cotton plants normally outgrow these effects and develop normally.
- Do not apply by air.
- Chemigation: Do not apply through any type of irrigation system.
- Do not apply more than 21 fluid ounces of this product per acre per year (equivalent to 0.20 pounds fluridone/acre; 0.25 pounds fomesafen/acre).
- Apply prior to planting or prior to emergence of cotton. DO NOT apply this product over the top of cotton plants as cotton injury will likely occur. Due to the potential for crop injury, tank mixing or use of this product with any other product containing fomesafen shall be at the exclusive risk of the user, applicator and/or application adviser. It is the pesticide user’s responsibility to ensure that all products in the listed mixtures are registered for the intended use. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.
- At rates of 16 fluid ounces per acre or more of this product, DO NOT tank-mix this product with other products containing fomesafen as cotton injury may occur.
- Do not apply more than 0.375 lb. of fomesafen (active ingredient), per acre per year from all sources, if other products containing fomesafen are used during the season.
- Organic fertilizer must be incorporated into soil prior to application of this product to the soil surface.
- This product may be applied in the following states or portion of states: Alabama, Arkansas, Florida (except Miami-Dade County), Georgia, Kansas (all counties East of or intersected by U.S. Highway 281), Louisiana, Mississippi, Missouri, North Carolina, Oklahoma (East of U.S. Highway 75 and East of Indian Nation Parkway), South Carolina, Tennessee, Texas (includes area East of U.S. Highway 77 to State Road 239 including all of Calhoun County), and Virginia. User is responsible for confirming product registration in their state of use.
- In Kansas: Do not apply more than a maximum of 0.25 lbs fomesafen per acre from any source, in any 2 year period.
- In Virginia: Do not apply more than a maximum of 0.375 lbs fomesafen per acre from any source, in any 2 year period.
- In Alabama, Arkansas, Mississippi, Missouri, and Tennessee do not apply to medium and fine textured soils. Do not apply more than 16 ounces per acre on coarse soils. Refer to Table 2 for description of soil types.
- Thoroughly clean the spray system with water and a suitable tank cleaner before and after each use.
- To provide adequate coverage, it is recommended that ground speed not exceed 10 mph during application.
- Avoid overlapping spray swaths as injury may occur to rotational crops.
Rotational Crop Restrictions
This product may persist in the soil past the cotton growing season. To avoid difficulties in establishing rotational crops, the following restrictions in Table 1 must be followed.
- If this product is used for two consecutive years in the same field, only plant cotton, peanut or sweet potato the following year in those fields.
- In the event of poor cotton stand due to adverse weather or other circumstances, a field treated with this product may be replanted with cotton following light tillage or planted in the undisturbed soil. During replanting, minimum tillage is recommended to preserve the herbicide barrier for effective weed control.
- If a field needs to be replanted with cotton due to poor stand or stand failure, do not apply a second application of this product, or other products containing fomesafen, as crop injury or illegal residues may occur. If tank-mix combinations were initially used, refer to product labels for any additional replanting instruction.
- Follow the crop rotation intervals specified in Table 1. For any crop not specifically listed in Table 1, do not replant for at least 18 months in fields treated with this product, as crop injury may occur.
- Over-application may result in crop injury or injury to rotational crops. Avoid overlapping spray swaths, as injury may occur to rotational crops.
- Do not graze rotated small grain crops or harvest forage or straw for livestock.
MIXING AND APPLICATION DIRECTIONS
Apply this product evenly and uniformly to the soil surface with a minimum spray solution of 10 gallons per acre. Fill spray tank partially full with water (e.g. ½ full). Start agitation. Add correct quantity of this product. Maintain continuous agitation while filling spray tank to required volume and during application. Do not stop agitation prior to or during application. Nozzle selection should meet manufacturer’s volume and pressure recommendations for preplant surface or preemergence applications. Uniform spray coverage is essential for good efficacy.
Spray Additives and Fertilizers: No adjuvants are needed for application of this product. However, if this product is part of a tank-mix that includes a burndown herbicide or combination, follow label use directions for the adjuvant/surfactant and other herbicides used in the tank-mix. Conduct a jar test before mixing this product with any other product to ensure compatibility.
Do not mix this product with spray adjuvants or drift control agents containing polyacrylamide, or fertilizers containing sulfur.
Soil Preparation – Start Weed Free
This product will not control established weeds. It is important to startweed free by controlling all existing weeds prior to and/or during this product application. Depending on the type of tillage, established weeds could be covered with soil and shielded from exposure to the burndown herbicide. Therefore, for best results, apply burndown herbicides 24 to 96 hours prior to cultivation in conventional and strip tillage systems. Depending on environmental conditions, tillage can also disturb the seed bank and cause more weeds to germinate. Therefore, it is recommended to tank-mix this product with a burndown herbicide, such as Gramoxone (active ingredient paraquat labeled for use in cotton), at the time of planting. It is the pesticide user’s responsibility to ensure that all products in the listed mixtures are registered for the intended use. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.
Apply this product as a preplant surface or preemergence application. Refer to Table 2 for specific rates by soil type. Use the lower rates in soils where weed pressure is low and the higher rates in soils where weed pressure is heavy. Application of this product to soils with high clay content may require higher rates. Application of this product to soils with high organic matter (e.g. >3%) may result in reduced efficacy.
This product may be applied as a banded application. When this product is applied on a band, calculate the amount of herbicide and water volume needed for band treatment by the following formulas given in the label.
Band width must not exceed 50% (one-half) the cotton row width. Best coverage is obtained with a minimum of two nozzles, one directed to each side of the planted row. Application with a single nozzle directed over the top of the row is suitable for preemergence applications. Cultivation of untreated areas may be needed following band applications.
This product contains both a Group 12 and Group 14 herbicide. These active ingredients, from different target site of action Groups, are combined in this product for improved weed control and resistance management practices. Any weed population may contain or develop plants naturally resistant to Group 12 or 14 herbicides.
Combining active ingredients is one way to delay development of herbicide resistance. However, weed species with acquired resistance to Group 12 or 14 may eventually dominate the weed population if Group 12 or 14 herbicides are used repeatedly in the same field or in successive years as the primary method of control for targeted species. This may result in partial or total loss of control of those species by this product or other Group 12 or 14 herbicides.
Do not make more than two consecutive annual applications of this product. After the second year’s application, use an alternative herbicide with a different target site of action and effective in controlling the weeds of concern the following year.
To delay herbicide resistance consider:
- Avoiding the consecutive use of this product and other target site of action Group 12 or 14 herbicides that have a similar target site of action, on the same weed species;
- Basing herbicide use on a comprehensive Integrated Pest Management (IPM) program;
- Monitoring treated weed populations for loss of field efficacy and treat weed escapes immediately with another group herbicide - start weed free and stay weed free;
- Contacting your local extension specialist, certified crop advisors, and/ or manufacturer for herbicide resistance management and/or integrated weed management recommendations for specific crops and resistant weed biotypes;
- Consulting your agricultural dealer, consultant, applicator, and/or appropriate state agricultural extension service representative for specific alternative cultural practices or herbicide recommendations available in your area.
- Contacting a SePRO Corporation company representative for further information or to report suspected resistance.
Integrated Pest Management
This product may be used as part of an Integrated Pest Management (IPM) program that can include biological, cultural, and genetic practices aimed at preventing economic pest damage. IPM principles and practices include field scouting or other detection methods, correct target pest identification, population monitoring, and treating when target pest populations reach locally determined action thresholds. Consult your state cooperative extension service, professional consultants or other qualified authorities to determine appropriate action treatment threshold levels for treating specific pest/crop systems in your area.
Germinating weeds can be controlled by soil residual activity from either preplant surface or preemergence applications of this product in no till, strip or conventional tillage situations.
Controlling Early Weed Escapes
DO NOT use this product as a stand-alone herbicide. This product must be used as part of a comprehensive weed control program. Weeds may escape control prior to this product being activated by moisture. A postemergent application within 18 days after planting that includes glyphosate, glufosinate, or other postemergent herbicide that is effective at controlling the target weed and compatible with the cotton variety, combined with a residual herbicide (e.g. Warrant or Dual Magnum), IS REQUIRED to control early germinating weeds and to overlap residual herbicides. The purpose of overlapping residual herbicides during postemergent applications is to eliminate all weed escapes for a zero-tolerance approach. Aggressive scouting is recommended and, when necessary, use secondary postemergent applications including a residual herbicide. Depending on the frequency of weed escapes, standard post-directed or layby herbicide applications are also recommended, when necessary, in addition to other cultural practices. Only use herbicides that are compatible with the cotton variety being grown. If uncertain, contact a local extension agent or crop consultant to verify herbicide tolerance for different cotton varieties.
The Brake F16 Preemergence Four-Step System: Start Weed Free. Stay Weed Free.
1. Pre-plant burndown and/or cultivate;
2. Apply this product at-plant or within 36 hours of planting with a burndown herbicide;
3. Postemergent application of a herbicide containing glyphosate, glufosinate, or other postemergent herbicide that is effective at controlling the target weed and compatible with the cotton variety, combined with a residual herbicide within 18 days after planting; and
4. Scout and utilize postemergent and layby applications with overlapping residuals as needed (See specific directions for Roundup Ready varieties below).
Roundup Ready (glyphosate tolerant) Cotton Varieties
When planting varieties of cotton that are tolerant to Roundup (glyphosate), any escape of glyphosate resistant weeds will not be controlled with a postemergent application of glyphosate. Thus, the use of overlapping residual herbicides is required to maintain adequate control of glyphosate-resistant weeds in such systems and to minimize the potential for weed seeds to germinate and become established. For best results, follow a comprehensive weed management program with timely applications of overlapping residual herbicides, such as the integrated herbicide program in Table 3. POST 1 – Application containing a glyphosate and a residual herbicide within 18 days after planting. POST 2 – Second postemergence application containing an additional residual herbicide within 18 days after the POST 1 application. LAYBY – Application containing a residual herbicide within 18 days after the POST 2 application. Additional applications may be necessary depending on environmental conditions and weed pressure. The timely application of overlapping residuals in the postemergent program is critical for a zero-tolerance weed strategy in Roundup Ready systems and to reduce the chances of glyphosate-weeds becoming established. In areas of high weed pressure and under conditions that favor weed emergence, apply postemergent applications following a shorter interval (e.g. 12 days).
Apply this product as a preemergence treatment to coarse, medium or fine textured soils at a rate of 11 to 16 fluid ounces/acre. Lower rates will reduce length of preemergent weed control. For best results, apply behind the planter (i.e. at planting) or within 36 hours after planting. Do not apply more than 16 fluid ounces per acre as crop injury may occur. Moisture is necessary to activate this product in soil for residual weed control. Dry weather following applications of this product may reduce effectiveness. For improved weed control, a minimum of 0.5 inches of rain or overhead irrigation is recommended following application.
Preplant Surface Applications
This product may be applied as preplant surface application in coarse, medium or fine textured soils up to 14 days before planting. Apply after the last tillage operation is completed. For preplant surface applications in medium or fine-textured soils at 16 to 21 fluid ounces/acre, a minimum of 0.5 inch of rainfall or overhead irrigation must occur before planting cotton; cotton must be planted at least 0.75 inches in depth; and the seedbed must not be disturbed or re-worked following application.
- Do not apply more than 21 fluid ounces per acre. Longevity of control is dependent on many factors such as soil type, moisture, and application rate. Lower rates will reduce length of preemergent weed control. Rates less than 16 ounces are only recommended as preemergent applications in Enlist, Xtendflex, and Liberty Link trait based systems.
- Silty clay loam is a transitional soil and may be classified as medium or fine.