Telone II

1,3-Dichloropropene (13)
Group
62719-32
Min Temp
N/A
Max Temp
N/A

DOT

TOXIC FLAMMABLE
True
False
True
False

Sara Title III

Hazardous Ingredient Cas # Percent EHS TPQ TRQ of Ingredient
1,3-Dichloropropene 542-75-6 97.5 NOL STD
[Balance] 2.5

WP/S&T

Warning

5 days

Handlers Performing Tasks with Liquid Contact Potential
Tasks with liquid contact potential are tasks performed outdoors or in a well-ventilated area. They include:
Equipment calibration or adjustment
Equipment clean-up and repair
Product sampling
Any activity less than 6 feet from an unshielded pressurized hose containing this product
Rinsate disposal
Fumigant transfer
Clean-up of small spills
Preparing containers for aeration
Any other task not otherwise listed in (2), (3), or (4) below

Handlers performing tasks with liquid contact potential must wear at minimum:
Coveralls over short-sleeved shirt and short pants
Chemical-resistant gloves, such as barrier laminate (EVAL) or viton
Chemical-resistant footwear plus socks
Chemical-resistant headgear for overhead exposure
Chemical-resistant apron
A face shield or safety glasses with brow and temple shields (do not wear chemical goggles)
A half-face respirator with either an organic-vapor-removing cartridge with a prefilter approved for pesticides (MSHA/NIOSH approval number prefix TC-23C) or canister approved for pesticides (MSHA/NIOSH approval number prefix TC-14G). See further respirator requirements in the User Safety Requirements section on the label.

Handlers Performing Tasks with No Liquid Contact Potential – Broadcast, In-Bed Applications, or Applications at the Time of Bedding Except as in 2b.
Tasks with no liquid contact potential are tasks performed outdoors or in a well-ventilated area. These tasks include:
Tractor driving
Soil sealing
Field activities on the day of application that do not disrupt the soil at the depth of liquid injection

Handlers performing tasks with no liquid contact potential must wear at minimum:
Loose fitting or well ventilated long-sleeved shirt and long pants
Shoes and socks
A face shield or safety glasses with brow and temple shields (do not wear chemical goggles)
A half-face respirator with either an organic-vapor-removing cartridge with a prefilter approved for pesticides (MSHA/NIOSH approval number prefix TC-23C) or canister approved for pesticides (MSHA/NIOSH approval number prefix TC-14G).
A respirator is not required (not applicable in California) if the occupants are within an enclosed cab that is in conformance with one of the following: 1) ANSI/ASAE S525-1.1 MAY98 sections 7.1.5, 7.1.7, 7.2.3, and 9, or 2) the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides -- 40 CFR 170.240(d)(5). The cab must be equipped with a vapor-adsorptive filter containing a minimum of 1000 grams activated charcoal. The filter must be changed after no more than 50 hours of application time. See further respirator requirements in the User Safety Requirements section on the label.
In addition, the PPE specified in (1) for activities with direct liquid contact potential must be immediately available and must be worn if the handler is to perform any direct-contact activity with a potential for liquid contact

Handlers Performing Tasks with No Liquid Contact Potential - Pre-Bed, Row Product Applications (e.g., Yetter Rig) (Not Applicable in California)
Tasks with no liquid contact potential are tasks performed outdoors or in a well-ventilated area. These tasks include:
Tractor driving
Soil sealing
Field activities on the day of application that do not disrupt the soil at the depth of liquid injection

Handlers performing tasks with no liquid contact potential must wear at minimum:
Loose fitting or well ventilated long-sleeved shirt and long pants
Shoes and socks
A face shield or safety glasses with brow and temple shields (do not wear chemical goggles)
In addition, the PPE specified in (1) for activities with direct liquid contact potential must be immediately available and must be worn if the handler is to perform any direct-contact activity with a potential for liquid contact

Handlers in Treated Area 1 to 5 Days After Application
Only the following handler tasks may be performed in the treated area within 5 days after the application is complete:
Assessing/adjusting the soil seal
Assessing pest control, application technique, or application efficacy
Sampling air or soil for this product
Removing tarp or plastic film
All other tasks are prohibited until the 5-day period has expired.

Handlers in treated area 1 to 5 days after application must wear at minimum:
Loose fitting or well ventilated long-sleeved shirt and long pants
Shoes and socks
A face shield or safety glasses with brow and temple shields (do not wear chemical goggles)
A half-face respirator with either an organic-vapor-removing cartridge with a prefilter approved for pesticides (MSHA/NIOSH approval number prefix TC-23C) or canister approved for pesticides (MSHA/NIOSH approval number prefix TC-14G).
A respirator is not required if the occupants are within an enclosed cab (not applicable in California) that is in conformance with one of the following: 1) ANSI/ASAE S525-1.1 MAY98 sections 7.1.5, 7.1.7, 7.2.3, and 9, or 2) the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides -- 40 CFR 170.240(d)(5). The cab must be equipped with a vapor-adsorptive filter containing a minimum of 1000 grams activated charcoal. The filter must be changed after no more than 50 hours of application time. See further respirator requirements in the User Safety Requirements section on the label.

In addition, the PPE specified in (1) for activities with direct liquid contact potential must be immediately available and must be worn if the handler is to perform any direct-contact activity with a potential for liquid contact

Handlers Exposed to High Concentrations
Handlers exposed to high airborne concentrations of this product, such as cleanup following large spills and exposure to this product in poorly ventilated areas, must wear at minimum:
Chemical-resistant suit
Chemical-resistant gloves, such as barrier laminate (EVAL) or viton
Chemical -resistant footwear plus socks
Chemical-resistant headgear
Supplied-air respirator with MSHA/NIOSH approval number prefix TC-19C or self-contained breathing apparatus (SCBA) with MSHA/NIOSH approval number prefix TC-13F. See further respirator requirements in the User Safety Requirements section on the label.

Handlers in Treated Area 1 to 5 Days After Application
Only the following handler tasks may be performed in the treated area within 5 days after the application is complete:
Assessing/adjusting the soil seal
Assessing pest control, application technique, or application efficacy
Sampling air or soil for this product
Removing tarp or plastic film
All other tasks are prohibited until the 5-day period has expired.
Handlers in treated area 1 to 5 days after application must wear at minimum:
Loose fitting or well ventilated long-sleeved shirt and long pants
Shoes and socks
A face shield or safety glasses with brow and temple shields (do not wear chemical goggles)
A half-face respirator with either an organic-vapor-removing cartridge with a prefilter approved for pesticides (MSHA/NIOSH approval number prefix TC-23C) or canister approved for pesticides (MSHA/NIOSH approval number prefix TC-14G).
A respirator is not required if the occupants are within an enclosed cab that is in conformance with one of the following: 1) ANSI/ASAE S525-1. 1 MAY98 sections 7. 1. 5, 7. 1. 7, 7. 2. 3, and 9, or 2) the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides - 40 CFR 170. 240(d)(5). The cab must be equipped with a vapor-adsorptive filter containing a minimum of 1000 grams activated charcoal. The filter must be changed after no more than 50 hours of application time. See further respirator requirements in the User Safety Requirements section on this label.
In addition, the PPE specified in (1) for activities with direct liquid contact potential must be immediately available and must be worn if the handler is to perform any direct-contact activity with a potential for liquid contact

Handlers Exposed to High Concentrations
Handlers exposed to high airborne concentrations of this product, such as cleanup following large spills and exposure to this product in poorly ventilated areas, must wear at minimum:
Chemical-resistant suit
Chemical-resistant gloves, such as barrier laminate (EVAL) or viton
Chemical-resistant footwear plus socks
Chemical-resistant headgear
Supplied-air respirator with MSHA/NIOSH approval number prefix TC-19C or self-contained breathing apparatus (SCBA) with MSHA/NIOSH approval number prefix TC-13F. See further respirator requirements in the User Safety Requirements section on the label.

Store in tightly-closed original container away from dwellings. Prolonged exposure of the container to direct sunlight must be avoided. Do not allow contamination of seeds, plants, fertilizers, or other pesticide chemicals.

Handlers in Treated Area 1 to 5 Days After Application
Only the following handler tasks may be performed in the treated area within 5 days after the application is complete:
Assessing/adjusting the soil seal
Assessing pest control, application technique, or application efficacy
Sampling air or soil for this product
Removing tarp or plastic film
All other tasks are prohibited until the 5-day period has expired.
Handlers in treated area 1 to 5 days after application must wear at minimum:
Loose fitting or well ventilated long-sleeved shirt and long pants
Shoes and socks
A face shield or safety glasses with brow and temple shields (do not wear chemical goggles)
A half-face respirator with either an organic-vapor-removing cartridge with a prefilter approved for pesticides (MSHA/NIOSH approval number prefix TC-23C) or canister approved for pesticides (MSHA/NIOSH approval number prefix TC-14G).
A respirator is not required if the occupants are within an enclosed cab that is in conformance with one of the following: 1) ANSI/ASAE S525-1. 1 MAY98 sections 7. 1. 5, 7. 1. 7, 7. 2. 3, and 9, or 2) the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides - 40 CFR 170. 240(d)(5). The cab must be equipped with a vapor-adsorptive filter containing a minimum of 1000 grams activated charcoal. The filter must be changed after no more than 50 hours of application time. See further respirator requirements in the User Safety Requirements section on this label.
In addition, the PPE specified in (1) for activities with direct liquid contact potential must be immediately available and must be worn if the handler is to perform any direct-contact activity with a potential for liquid contact
Handlers Exposed to High Concentrations
Handlers exposed to high airborne concentrations of this product, such as cleanup following large spills and exposure to this product in poorly ventilated areas, must wear at minimum:
Chemical-resistant suit
Chemical-resistant gloves, such as barrier laminate (EVAL) or viton
Chemical-resistant footwear plus socks
Chemical-resistant headgear
Supplied-air respirator with MSHA/NIOSH approval number prefix TC-19C or self-contained breathing apparatus (SCBA) with MSHA/NIOSH approval number prefix TC-13F. See further respirator requirements in the User Safety Requirements section on this label.

False
False
False
False
False
False

Greenbook works with pesticide, herbicide and fungicide manufacturers to convert product labels into actionable data.

Data Delivery

We provide versatile data solutions designed to make plant protection data easily accessible to farmers, researchers & consultants.

Farm Management

Our database is used to deliver precision ag services provided by industry associations, retail outlets and application developers.

Chemical Protection

Our client partners include the most recognized chemical plant protection manufacturers in the agriculture industry.